Continuing to serve our community since 1964


Plasma Cutter Hobart 27i Amp

Where to find Plasma Cutter Hobart 27i Amp in Honolulu

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: HOBART
Model: AirForce 550i
Daily: $75.00
Weekly: $300.00
Monthly: $900.00
  • MVP (multi voltage plug) allows use with 120V or 240V input
  • Excels at cutting 3/8 in mild steel, can sever 5/8 in mild steel
  • Cuts faster than oxy fuel
  • Smaller heat-affected zone for less warping
  • No gas pressure settings for flame tuning needed
  • Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 400). Weighs only 27.8 lbs.
  • Capable with Engine-Driven Welders - Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outletof 6 kW or more.
  • New High-Performance Ergonomic Torch - The new XT30R torch is designed for increased comfort, more efficient cooling and longer lasting cutting tips.
  • Multi-Voltage Plug (MVP) - Allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
  • Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
  • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
  • Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
  • Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104 Fahrenheit. Duty cycle will increase as environmental temperature decreases.
  • Line Voltage Compensation (LVC) - Provides peak performance power under variable input voltage conditions ( 15%) for steady and cleaner ending cuts.
  • Power Factor Correction - Expands operator s work area via extension cords while minimizing nuisance trips caused by voltage drops.
  • Stock Number #500565 AirForce 27i
  • Rated Output at 35% Duty Cycle 240 V - 27 A, 92 VDC
  • 120 V - 20 A, 88 VDC
  • Max. Open-Circuit Voltage 400 V
  • Amps Input at
  • Rated Output, 60 Hz 120V (15 A) 20.6
  • 120V (20 A) 28.8
  • 240V 13.9
  • Plasma Gas Flow/Pressure 3.0 CFM (85 L/min) at 90-120 PSI (621 827 kPA) recommended
  • Dimensions H: 11-1/4 in. (286 mm)
  • W: 8-1/4 in. (210 mm)
  • D: 14-1/4 in. (362 mm)
  • Net Weight 27i w/torch: 27.8 lb (12.6 kg)
  • Ship weight: 32.6 lb (14.8 kg)
  • Requires:
  • - Electrode and Tip purchase
  • - Air compressor capable of 3 CFM@90PSI
  • - Dark Glasses (Shade #5)
  • - 4500 Watt generator for 230V (NEMA 6-50R)
  • - 3500 Watt generator for 115V (NEMA 5-15R)
Add of the above items to my quote request
for a period of   day(s)   week(s)   month(s)  

Also check the following item(s) related to the above:

* Prices are subject to change. Tax and other fees not shown in above price estimate.

* Please call us for any questions on our plasma cutter hobart 27i amp serving Honolulu, Waikiki and surrounding communities on Oahu.